[交流] 电脑喇叭

ckimy

原帖由 89010401 于 2008-11-5 04:55 PM 发表
ckimy,问你一下，你的MX5021    RMS: 90watts，可是FX6021      RMS: 75 watts。。。RMS

高比较好~~~

RMS是音响的东西。。。

zechs

原帖由 89010401 于 2008-11-5 03:36 PM 发表

6xx还ok啊，只是哦，你有图片吗？post上来分享。。。还是谁有Altec Lancing的官方网站？

http://www.testfreaks.com/pc-speakers/altec-lansing-fx6021/
http://images.google.com.my/imag ... amp;sa=N&tab=wi

zechs

原帖由 89010401 于 2008-11-5 04:55 PM 发表
ckimy,问你一下，你的MX5021    RMS: 90watts，可是FX6021      RMS: 75 watts。。。RMS

http://en.wikipedia.org/wiki/Audio_power

89010401

原帖由 ckimy 于 2008-11-5 04:59 PM 发表


高比较好~~~

RMS是音响的东西。。。

如果高比较好，那么不是MX5021比较好？又说FX6021好........

zechs

原帖由 89010401 于 2008-11-5 10:08 PM 发表

如果高比较好，那么不是MX5021比较好？又说FX6021好........

FX6021是低在satelite高中音元件，mx5021的比较大，看图片应该可以了解，不同的设计不能以rms来衡量。
小也不代表不好

89010401

原帖由 zechs 于 2008-11-5 10:33 PM 发表


FX6021是低在satelite高中音元件，mx5021的比较大，看图片应该可以了解，不同的设计不能以rms来衡量。
小也不代表不好

哦，那么这两架（MX5021和FX6021）你都听过了？你的介绍是FX6021？我只要声音清，bass要重。。。

zechs

原帖由 89010401 于 2008-11-5 11:16 PM 发表

哦，那么这两架（MX5021和FX6021）你都听过了？你的介绍是FX6021？我只要声音清，bass要重。。。

听过，没试用过。。。
不过我相信FX6021会比较好。

89010401

原帖由 zechs 于 2008-11-5 11:20 PM 发表


听过，没试用过。。。
不过我相信FX6021会比较好。

谢谢你的建议，我回去看看这款（FX6021）的，因为哦，这款也比较美丽~~

@ccountant

RMS

Root mean square, usually referred to simply as rms, is a mathematical term prevalent in many different fields, including electrical engineering and statistics. The term refers to the process of deriving the square root of the average of a group of numbers and is one of the primary methods of measuring electrical output in volts and watts of an AC wave.

One of its more recognizable uses of root mean square in regards to computer hardware is as a measurement of power for audio amplifiers, or speakers. Sometimes you’ll see speakers measured using a peak power. This refers to the maximum amount of power a set of speakers can handle at once. However, obtaining a root mean square measurement is considered a far better indicator of the quality of the speakers, not to mention a better way to rate the amplifier power. This is because a root mean square measurement is the maximum amount of power a speaker set can handle throughout the lifetime of the speakers.

Speakers are usually rated with a peak or rms measurement, although high-end speaker units tend to use a root mean square measurement, posting an rms power rating somewhere on the individual speaker units.


是越高越好的

ckimy

原帖由 @ccountant 于 2008-11-5 11:30 PM 发表
RMS

Root mean square, usually referred to simply as rms, is a mathematical term prevalent in many different fields, including electrical engineering and statistics. The term refers to the proc ...

所以我拿MX5021