S2root 后 完全不能开机。。帮帮忙！！

炎D__小翔

Urgent !!!!!我刚刚把我samsung galaxy S2 19100GT root了~ 就是下载odin3.0接着 install了insecured Kernel,接着我的电话就自动restart.
问题来了，我的电话开不到机，画面停留在samsung galaxy S2.
是不是我下载错kernel version?
有办法救吗...
目前试过factory reset, install original kernel.都失败
**惟有odin mode 和manufacture mode 能操作~

yipsoutseng

刷回你之前的firmware就好了，记得刷之前 wipe date/factory reset先。
点这里找你的firmware。

还有请纠正你的电话型号，哪有19100GT的

现在root无需刷kernel了，用下面的方法吧
ICS  : http://www.jbtalks.cc/thread-1238898-1-1.html
JB  : http://www.jbtalks.cc/thread-1382026-1-1.html

炎D__小翔

yipsoutseng 发表于 2014-2-7 01:03 PM
刷回你之前的firmware就好了，记得刷之前 wipe date/factory reset先。
点这里找你的firmware。

你好~~感激你的回复。。。下载了filmware过后。。使用odin 1.85 ,caption 那边要勾什么？耍了就好了？还有我手机有时怪怪的，开不进manufacture mode...odin mode是肯定开得到 samung galaxy S2 Gt19100G

yipsoutseng

炎D__小翔 发表于 2014-2-7 05:31 PM
你好~~感激你的回复。。。下载了filmware过后。。使用odin 1.85 ,caption 那边要勾什么？耍了就好了？还有 ...

How to flash in ODIN:
1. Select the related .tar file under PDA section.
2. Only tick Auto Reboot and F. Reset Time.
3. Start flashing.
4. Done.

参考 : http://forum.xda-developers.com/showthread.php?t=2199288

---

How To manually update Galaxy S2 I9100G to Official Android Jelly Bean 4.1.2 GDXLS8?

1. Search Samfirm to download the Specific 4.1.2 to your country Or Download Galaxy S2 4.1.2 GDXLS8 (Malaysia) firmware and Extract it to PC
2. Download Odin and Extract it
3. Power off and boot Galaxy S2 in to download mode. ( Volume down + Home + Power )
4. In download mode connect your phone to PC.
5. Now Open Odin and look in to ID:COM box it will be yellow with a port name and a "Added!" message will be displayed in Message box.
6. In Odin..Click PDA and select I9100GDXLS8_I9100GOLBLS8_I9100GDXLS2_HOME.tar.md5 from Extracted firmwares folder.

炎D__小翔

关于那个filmware是需要member才能下载。。我注册不到>.<能借我id??

炎D__小翔

19100GDXLS8 应该是我的version了。。我没记错的话~ 结果我在下载kernel时选了最接近的 GDXLP6 帮帮忙

炎D__小翔

还有。。我电话进不去manufacture mode，前天还能的....odin mode就一定能进~ 不懂是不是我不会开

yipsoutseng

炎D__小翔 发表于 2014-2-8 02:38 PM
还有。。我电话进不去manufacture mode，前天还能的....odin mode就一定能进~ 不懂是不是我不会开

1.Download the Specific 4.1.2 to your country Or Download Galaxy S2 4.1.2 GDXLS8 (Malaysia) firmware  and Extract it to PC
2. Download Odin and Extract it
3. Power off and boot Galaxy S2 in to download mode. ( Volume down + Home + Power )
4. In download mode connect your phone to PC.
5. Now Open Odin and look in to ID:COM box it will be yellow with a port name and a "Added!" message will be displayed in Message box.
6. In Odin..Click PDA and select I9100GDXLS8_I9100GOLBLS8_I9100GDXLS2_HOME.tar.md5 from Extracted firmwares folder.

自己看着办吧，看不懂我也帮不了你了，找个懂这些东西的朋友帮你，去电话店最直接。