公司/店 地址:
25 Bukit Batok Crescent #01-06,Singapore 658066
公司/店 简介:
Service
工作性质:
-Plan, execute and supervise projects.
-Conduct research into the design, operation or performance of robotic parts and systems.
-To perform routine maintenance works on industrial machinery/robotic/water treatment equipment.
-To provide technical support to the production machine, design, programming, setup, installation, calibration and troubleshooting.
-Responsible for Quality Assurance and Quality Control of the technical performances.
-Ensure project is delivered according to schedule and specifications.
-On site commissioning, pre-FAT,FAT,SAT of automation line and systems.
-To prepare service and shift report.
-To perform within ISO and safety Standard.
-Co-ordinate with clients & sub-contractors for technical/contract/admin activities.
-Procurement Sourcing (e.g. hardware & software)
-Maintain all site recordings, conduct tests, site measurements and claims against work done.
-Any other assignment delegated by the company.
工作地点:
25 Bukit Batok Crescent #01-06,Singapore 658066
工作时间:
9AM-6PM (Day shift)
工作日期:
5.5 days
工钱:
面谈
条件:
-Expertise in Robotics Programming & Automation.
-Vision Guided Robotic and strong in Vision Guided System an advantage.
-Strong customer communication, teamwork, and verbal/written communication skill.
-Knowledge programming skills, preferably in AutoCAD, Solid works, C#, C programming, HMI, Robot studio, PLC (Prologic Controlling) or Vision Robotic System.
-Must be able to plan, design, assembly, set-up, program, perform FAT/SAT and commission a FULL automated Vision Guided Robotic modular/automated line solely.
-Able to Write basic service reports.
-Basic machine programming/PLC/Vision Programming preferable.
公司/店 地址:
25 Bukit Batok Crescent #01-06,Singapore 658066
公司/店 简介:
Service
工作性质:
-Plan, execute and supervise projects.
-Conduct research into the design, operation or performance of robotic parts and systems.
-To perform routine maintenance works on industrial machinery/robotic/water treatment equipment.
-To provide technical support to the production machine, design, programming, setup, installation, calibration and troubleshooting.
-Responsible for Quality Assurance and Quality Control of the technical performances.
-Ensure project is delivered according to schedule and specifications.
-On site commissioning, pre-FAT,FAT,SAT of automation line and systems.
-To prepare service and shift report.
-To perform within ISO and safety Standard.
-Co-ordinate with clients & sub-contractors for technical/contract/admin activities.
-Procurement Sourcing (e.g. hardware & software)
-Maintain all site recordings, conduct tests, site measurements and claims against work done.
-Any other assignment delegated by the company.
工作地点:
25 Bukit Batok Crescent #01-06,Singapore 658066
工作时间:
9AM-6PM (Day shift)
工作日期:
5.5 days
工钱:
面谈
条件:
-Expertise in Robotics Programming & Automation.
-Vision Guided Robotic and strong in Vision Guided System an advantage.
-Strong customer communication, teamwork, and verbal/written communication skill.
-Knowledge programming skills, preferably in AutoCAD, Solid works, C#, C programming, HMI, Robot studio, PLC (Prologic Controlling) or Vision Robotic System.
-Must be able to plan, design, assembly, set-up, program, perform FAT/SAT and commission a FULL automated Vision Guided Robotic modular/automated line solely.
-Able to Write basic service reports.
-Basic machine programming/PLC/Vision Programming preferable.
公司/店 地址:
25 Bukit Batok Crescent #01-06,Singapore 658066
公司/店 简介:
Service
工作性质:
-Plan, execute and supervise projects.
-Conduct research into the design, operation or performance of robotic parts and systems.
-To perform routine maintenance works on industrial machinery/robotic/water treatment equipment.
-To provide technical support to the production machine, design, programming, setup, installation, calibration and troubleshooting.
-Responsible for Quality Assurance and Quality Control of the technical performances.
-Ensure project is delivered according to schedule and specifications.
-On site commissioning, pre-FAT,FAT,SAT of automation line and systems.
-To prepare service and shift report.
-To perform within ISO and safety Standard.
-Co-ordinate with clients & sub-contractors for technical/contract/admin activities.
-Procurement Sourcing (e.g. hardware & software)
-Maintain all site recordings, conduct tests, site measurements and claims against work done.
-Any other assignment delegated by the company.
工作地点:
25 Bukit Batok Crescent #01-06,Singapore 658066
工作时间:
9AM-6PM (Day shift)
工作日期:
5.5 days
工钱:
面谈
条件:
-Expertise in Robotics Programming & Automation.
-Vision Guided Robotic and strong in Vision Guided System an advantage.
-Strong customer communication, teamwork, and verbal/written communication skill.
-Knowledge programming skills, preferably in AutoCAD, Solid works, C#, C programming, HMI, Robot studio, PLC (Prologic Controlling) or Vision Robotic System.
-Must be able to plan, design, assembly, set-up, program, perform FAT/SAT and commission a FULL automated Vision Guided Robotic modular/automated line solely.
-Able to Write basic service reports.
-Basic machine programming/PLC/Vision Programming preferable.
公司/店 地址:
25 Bukit Batok Crescent #01-06,Singapore 658066
公司/店 简介:
Service
工作性质:
-Plan, execute and supervise projects.
-Conduct research into the design, operation or performance of robotic parts and systems.
-To perform routine maintenance works on industrial machinery/robotic/water treatment equipment.
-To provide technical support to the production machine, design, programming, setup, installation, calibration and troubleshooting.
-Responsible for Quality Assurance and Quality Control of the technical performances.
-Ensure project is delivered according to schedule and specifications.
-On site commissioning, pre-FAT,FAT,SAT of automation line and systems.
-To prepare service and shift report.
-To perform within ISO and safety Standard.
-Co-ordinate with clients & sub-contractors for technical/contract/admin activities.
-Procurement Sourcing (e.g. hardware & software)
-Maintain all site recordings, conduct tests, site measurements and claims against work done.
-Any other assignment delegated by the company.
工作地点:
25 Bukit Batok Crescent #01-06,Singapore 658066
工作时间:
9AM-6PM (Day shift)
工作日期:
5.5 days
工钱:
面谈
条件:
-Expertise in Robotics Programming & Automation.
-Vision Guided Robotic and strong in Vision Guided System an advantage.
-Strong customer communication, teamwork, and verbal/written communication skill.
-Knowledge programming skills, preferably in AutoCAD, Solid works, C#, C programming, HMI, Robot studio, PLC (Prologic Controlling) or Vision Robotic System.
-Must be able to plan, design, assembly, set-up, program, perform FAT/SAT and commission a FULL automated Vision Guided Robotic modular/automated line solely.
-Able to Write basic service reports.
-Basic machine programming/PLC/Vision Programming preferable.
公司/店 地址:
25 Bukit Batok Crescent #01-06,Singapore 658066
公司/店 简介:
Service
工作性质:
-Plan, execute and supervise projects.
-Conduct research into the design, operation or performance of robotic parts and systems.
-To perform routine maintenance works on industrial machinery/robotic/water treatment equipment.
-To provide technical support to the production machine, design, programming, setup, installation, calibration and troubleshooting.
-Responsible for Quality Assurance and Quality Control of the technical performances.
-Ensure project is delivered according to schedule and specifications.
-On site commissioning, pre-FAT,FAT,SAT of automation line and systems.
-To prepare service and shift report.
-To perform within ISO and safety Standard.
-Co-ordinate with clients & sub-contractors for technical/contract/admin activities.
-Procurement Sourcing (e.g. hardware & software)
-Maintain all site recordings, conduct tests, site measurements and claims against work done.
-Any other assignment delegated by the company.
工作地点:
25 Bukit Batok Crescent #01-06,Singapore 658066
工作时间:
9AM-6PM (Day shift)
工作日期:
5.5 days
工钱:
面谈
条件:
-Expertise in Robotics Programming & Automation.
-Vision Guided Robotic and strong in Vision Guided System an advantage.
-Strong customer communication, teamwork, and verbal/written communication skill.
-Knowledge programming skills, preferably in AutoCAD, Solid works, C#, C programming, HMI, Robot studio, PLC (Prologic Controlling) or Vision Robotic System.
-Must be able to plan, design, assembly, set-up, program, perform FAT/SAT and commission a FULL automated Vision Guided Robotic modular/automated line solely.
-Able to Write basic service reports.
-Basic machine programming/PLC/Vision Programming preferable.